Hydrocyclone Assemblies
ChemIndustrial offers hydrocyclones as pre-engineered assemblies
that include most of the required adjacent piping specialties
needed for installation. Customers achieve significant project
savings through:
- Reduced design effort
- Elimination of materials take-offs
- Fewer purchase orders
- Easier receiving, inventorying, staging, etc.
- Less installation hours
- Fewer installation errors
- Quicker start-ups
The model HY30PPB20-ASY is a typical hydrocyclone assembly.[1]
Here's what it includes:
|
Hydrocyclone with 3" inside diameter plus:
- Two (2) body extensions
- Two (2) 1" outlet ball valves
- Union flanges throughout to allow easy inspection
and service
- All contact surfaces in resistant materials:
- Polypropylene (All plastic in contact with
process except ball in ball valves)
- Teflon® (ball in ball valves)
- Viton® (gaskets)
|
ChemIndustrial hydrocyclone assembly, model HY30PPB20-ASY
[ Full
Size Image]
|
- Extra loose parts
- Two (2) orifice blanks. These are to be drilled in
the field and used to replace the outlet valve(s) after
your flow requirements are determined.
- Two (2) 90o 1" elbows. Used if the
axial hydrocyclone outlets must discharge in a horizontal
direction.
- Two (2) support brackets. These AISI 304SS brackets
support the hydrocyclone from two horizontal 1"
square tubes in such a way that the
hydrocyclone can
be removed for easy inspection and service. Brackets
are compatible with ChemIndustrial's engineered Hydrocyclone
support structures. They are designed to slip over 1"
square tubes where they can be bolted or welded as required.
Dimensions:
- Assembly height overall: 34.5"
- Connections:
- Inlet: 2" FPT
- Upflow outlet: 1" FPT
- Downflow outlet: 1" FPT
[1] Similar assemblies are
available for all hydrocyclone
models.
|
